The strength of a permanent wall unit. The flexibility of a movable display.
Four frame configurations built from the same steel and aluminum slatwall we put on your walls. Put them on casters, reconfigure them for a seasonal reset, and merchandise them with the accessories you already own.
Four configurations
Floor space, traffic flow, and how many faces you need to merchandise.
These are drawn overhead, all to the same scale, so you can actually compare them. The dashed outline is the floor footprint; the dashed curve is how customers move past it.
The highest-capacity frame. Four merchandising faces spread across an open floor, so a single fixture can carry a whole category. Needs room around it to work.
H-Frame detailAlso four faces, but rotated around a centre post so the footprint collapses. The frame for narrow aisles, corners and anywhere an H-Frame would block the run.
Pinwheel detailTurns a corner and creates a focal point. Used to anchor the end of an aisle or to steer traffic into a department rather than past it.
L-Frame detailA two-sided run with a divider off the centre. Splits one fixture into distinct merchandising zones without buying two fixtures.
T-Frame detailAt a glance
Which frame for which floor.
| Attribute | H-Frame | Pinwheel | L-Frame | T-Frame |
|---|---|---|---|---|
| Merchandising faces | 4 | 4 | 2 | 3 |
| Floor footprint | Largest | Tightest for 4 faces | Corner | Linear |
| Traffic role | Destination | Fits the gap | Focal point, steers traffic | Two-sided run |
| Published dimensions | 48″L × 26″W × 54″H | Custom to plan | Custom to plan | Custom to plan |
| Material | Steel or aluminum | Steel or aluminum | Steel or aluminum | Steel or aluminum |
| Casters | Available | Available | Available | Available |
| Best for | Whole-category displays on open floor | Narrow aisles and corners | Anchoring an aisle end | Splitting one run into zones |
Specifications
What every frame shares.
Construction
All configurations- Designs
- H-Frame
- L-Frame / Focal Point
- T-Frame
- Pinwheel
- Panel material
- Steel slatwall
- Aluminum slatwall
- H-Frame dimensions
- 48″L × 26″W × 54″H (steel and aluminum)
- Mobility
- Casters available for easy reconfiguration
- Shipping
- Ships knocked down
- Custom
- Custom heights, widths, lengths and colours
Merchandising
Accessories- Accessories
- Shelves
- Brackets
- Peg hooks
- Shelving
- High-performance 6″ and medium-duty 3″ steel shelves
- Brackets
- Heavy-duty, 12″ / 14″ / 16″ / 18″
- Load
- Panels rated over 50 lbs per linear foot
- Matching walls
- Same panel as the wall system, so floor and wall match
Finishes
Match the wall, or deliberately do not.
Steel frames carry the full eleven-colour range. Aluminum frames come anodized, white or raw.
Steel frames — 11 finishes
Aluminum frames — 3 finishes
Renderings are indicative. Request physical samples before specifying.
Good to know
Common questions about display fixtures
Related products
Ready to start
Send us the floor plan. We will tell you what fits.
Aisle widths, ceiling height and the category you are merchandising are usually enough for us to recommend a configuration and quantity.